Dry-Moly (Dry Lubrication Spray)
SAF–T–EZE Dry–Moly is an air-drying, oil-free, dry lubricant film. Dry–Moly, a combination of MoS2 powder and high-temperature binder, is ideal for applications between -73°C and 343°C.
SAF–T–EZE Dry–Moly can be used for general industrial maintenance where clean and dry lubricants are required. Dry–Moly lubricates metal parts and protects them from wear and corrosion. SAF–T–EZE Dry–Moly does not bleed as it forms an oil-free, air-freezing lubricant layer and protects the metal against dust and dirt.
SAF–T–EZE Dry–Moly is resistant to water and water-based solutions. Exceeding 190°C increases the resistance of solvents. Dry–Moly is recommended for high-temperature applications in areas subject to constant friction. It is an ideal lubricant recommended in dusty places where an oil-based lubricant can collect dirt. Ideal for applications with lubricated parts that are constantly being moved.
|Between -73°C and 343°C
General industrial maintenance, metal industry, textile industry, wood and paper industry. For lubricating and protecting door hinges and grooves. Lubrication of threaded and non-threaded parts before assembly. It is used as a lubricant in shaft bearings and valves.
INSTRUCTIONS FOR USE:
Shake the can before use. Make sure the surface to be applied is clean and dry. Spray the surface to be lubricated from a distance of 20-30cm. Allow parts to dry for 5-10 minutes before using.
Please contact our company for more detailed information.